This new modul is a 8 x 24V PWM modul with individual current sensors isolayed yo 3KV. Each PWM is 10A and the modul in total is 10A.
Usage:
- 8 Digital On/Off signals
- 8 PWM Signals
- 8 x Solenoids
- 4 x DC Motors
- 2 x Stepper Motors
- 2 x 3-Phase Motors
This is a dual position module using a 18 pin MX23 connector – you can get 3 of these in a standard box, but you need to manage your current budget. The mock-up below is mostly for the connector – a lot of components are missing yet.
I am looking forward to meet this board assuming I can do it as planned. I also need to add 24V connectors on the main board to support this module.
This is a very ambigious module on so little space, but it is one that will be very usefully and fun to work with due to it’s flexible capabilities. I am removing so much from my original Main board that I can afford to add more connectors and current sensors on 24V. 10A channels are a bit ambigious, but it will be a current budget that limit the total usage. The idea is that this board pop up as a resource and that you then add functionality/limits to pins. I have not included Resolver/Encoder this time as this is better added on a separate modul on CAN- 3 of these are 6 ports leaving the 7th for CAN or Ethernet – that is 6 x Stepper motors or 12 x DC motors from one box.